Description

Modified Sine Wave DC to AC Power Inverter

Features

• Modified sine wave output
• High surge power of up to 200%.
• Soft start
• Reverse protection for battery
• USB Port (5V,500mA) for charging USB devices

• Use MOSFET as electronic switch, without any mechanical switch.
• Protections: Battery low alarm/Over voltage/Over shutdown/ Output short/ Input reverse polarity/ Over load
• 1 year warranty

Description

Pure Sine Wave DC to AC Power Inverter. The output wave form of the PSW inverter has a very low harmonic distortion, like utility-supplied electricity. It is therefore suitable for sensitive electrical devices such as computers, TVs, LED lights, fridges and pumps.

Features

• Pure sine wave output (THD<3%)
• High surge power up to 200% (2s), 150% (10s)
• USB Port (5V,500mA) for charging USB devices
• Two multiple controlled DC fans: temperature & load

• Protections: Battery low alarm/Over voltage/Over shutdown/Output short/ Input reverse polarity/ Over load
• Remote control (optional), extra cost
•  1 year warranty

Description

Modified Sine Wave (MSW) inverter with built-in charger and automatic transfer switch that offers a complete power conversion solution: DC to AC, battery charging and automatic transfer switch between battery and AC power. It can be used as a stand-alone power supply or as an UPS (Uninterruptable Power Supply). MSW inverters are a reliable, cost-effective choice for running typical resistive loads like incandescent lights and hair dryers. Though MSW inverters do not produce an accurate replica of the pure sine wave form of utility power, they do provide an affordable option that is quite adequate for many mobile power applications.

Features

• Modified sine wave output
• High surge power up to 200%
• USB Port (5V,500mA) for charging USB devices
• Built in battery charger and Auto Transfer Switch (ATS)
• 10ms transfer time between battery and AC

• 3-stage battery charging: bulk charge, absorption charge, float charge
• Three sage charge control system (bulk, absorption) and float mode with temperature compensation.
• Protections: Battery low alarm/Over voltage/Over shutdown/Output short/ Input reverse polarity/Over load
• Remote control (optional), extra cost
• 1 year warranty

Description

Pure Sine Wave (PSW) inverter with built-in battery charger and automatic transfer switch that offers a complete power conversion solution: DC to AC conversion, battery charging and automatic transfer switch between battery and AC power. It can therefore be used as a stand-alone power supply or an UPS (Uninterruptable Power Supply). The output wave form of the PSW inverter has a very low harmonic distortion, like utility-supplied electricity. It is therefore suitable for sensitive electrical devices such as computers, TVs, LED lights, fridges and pumps.

Features

• Pure sine wave output (THD<3%)
• High surge power up to 200%
• USB Port (5V,500mA) for charging USB devices
• Two multiple controlled DC fans: temperature & load
• Built in battery charger and Auto Transfer Switch (ATS)
• 10ms transfer time between battery and AC(ATS)

• 3-stage battery charging: bulk charge, absorption charge, float charge
• Protections: Battery low alarm/Over voltage/Over shutdown/Output short/ Input reverse polarity/Over load
• Remote control (optional), extra cost
• 1 year warranty

Description

Durable low frequency PSW inverter with AC battery charger. Connected to batteries the inverter functions as a UPS with transfer time of <10ms;

Features

• High overload ability of up to 300% rated power (20 sec).
• Low quiescent current.
• Selectable power saver mode to reduce power consumption to 10W (3s sensing cycle)/3W (30s sensing cycle).
• Extract maximum power from various batteries with different protections. Low voltage trip can be selected as either 9.5V/10V or 10V/10.5V.
• Uses Power Factor Correction (PFC), which results in lower power consumption than conventional units.
• Automatic Generator Start (AGS) optional.
• 10ms typical transfer time between battery and AC, which guarantees power continuity.
• Uses selectable input AC voltage (184-253V or 154-253V) for different kinds of loads.

• High charge rate of up to 90A, selectable from 0-100%.
• Units utilize 3-step intelligent battery charging equipped with 8 preset battery type selector plus de-sulfurization cycle for totally flat batteries.
• Allows start-up and through power with depleted batteries.
• Battery/AC priority switch for off-grid solar/wind system.
• LCD status display and USB communication port.
• 17 alarms/warnings for easier operation and trouble-shooting.
• Ability to switch the unit on/off.

Description

High-quality, high efficiency PSW inverter + AC charger with a ultra low Total Harmonic Distortion (THD) of only 7% under full linear loads. Connected to batteries the inverter functions as a UPS with transfer times of <10ms. The transformers of this top line inverters are designed to comply with UL and efficiency of ±90%.

Features

• Durable low frequency design.
• Smart remote control.
• High overload capacity 300% (20s).
• Designed to operate under harsh environment.
• DC start & automatic self-diagnostic function.
• Compatible with both linear & non-linear load.
• Easy to install and operate.
• Low DC voltage supports home & office appliances.
• Powerful charge rate up to 100A, selectable from 0%-100%.
• High efficiency design and power saving mode to conserve energy.
• Battery/AC priority switch for off-grid solar/wind system.

• 13 VDC battery recover point, dedicated for renewable energy systems.
• 8 pre-set battery type selector plus de-sulfurization cycle for totally flat batteries.
• 4-step intelligent battery charging, PFC (power factor correction) for charger.
• 8 ms typical transfer time between utility & battery, guarantees power continuity.
• 15s delay before transfer when AC resumes, protection for load when used with generator.

Description

This range of inverters is similar to the HP range but with a build-in solar charger.
High-quality, high efficiency PSW inverter + AC charger + MPPT solar charger with a ultra low Total Harmonic Distortion (THD) of only 7% under full linear loads. Connected to batteries the inverter functions as a UPS with transfer times of <10ms. The transformers of this top line inverters are designed to comply with UL and efficiency of ±90%.

Features

• Durable low frequency design.
• Smart remote control.
• High overload capacity 300% (20s).
• Designed to operate under harsh environment.
• DC start & automatic self-diagnostic function.
• Compatible with both linear & non-linear load.
• Easy to install and operate.
• Low DC voltage supports home & office appliances.
• Powerful charge rate up to 100A, selectable from 0%-100%.
• High efficiency design and power saving mode to conserve energy.

• Battery/AC priority switch for off-grid solar/wind system.
• 13 VDC battery recover point, dedicated for renewable energy systems.
• 8 pre-set battery type selector plus de-sulfurization cycle for totally flat batteries.
• 4-step intelligent battery charging, PFC (power factor correction) for charger.
• 8 ms typical transfer time between utility & battery, guarantees power continuity.
• 15s delay before transfer when AC resumes, protection for load when used with generator.

Description

This is a multi-function inverter/charger, combining the functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power supply. The comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.

Features

• Pure sine wave inverter.
• High surge capacity of 200% for 5s.
• Configurable input voltage range for home appliances and personal computers via LCD setting.
• Configurable battery charging current based on applications via LCD setting.
• Configurable AC/Solar Charger priority via LCD setting.
• Compatible with mains voltage or generator power.
• Auto restart while AC is recovering.

• Overload/ Over temperature/ short circuit protection.
• Smart battery charger design for optimized battery performance.
• Cold start function.
• Up to six units in parallel or in three phase configuration (5KVA unit only).
• 15s delay before transfer when AC resumes, protection for load when used with generator.

Description

This is a multi-function inverter/charger, combining the functions of inverter, PWM (IP Range) or MPPT (IM Range) solar charger and battery charger to offer uninterruptible power supply. The comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.

Features

• Pure sine wave inverter.
• High surge capacity of 200% for 5s.
• Configurable input voltage range for home appliances and personal computers via LCD setting.
• Configurable battery charging current based on applications via LCD setting.
• Configurable AC/Solar Charger priority via LCD setting.
• Compatible with mains voltage or generator power.
• Auto restart while AC is recovering.

• Overload/ Over temperature/ short circuit protection.
• Smart battery charger design for optimized battery performance.
• Cold start function.
• Up to six units in parallel or in three phase configuration (5KVA unit only).
• Model SineON IM5KVA-48-V can can charge batteries utilizing both the solar and AC charger at the same time resulting in a high charge rate of 120A

Description

This hybrid PV inverter can provide power to connected loads by utilizing PV power, utility power and battery power. Depending on different power situations, this hybrid inverter is designed to generate continuous power from PV solar modules (solar panels), battery, and the utility. When MPP input voltage of PV modules is within an acceptable range, this inverter can generate power and feed back into the grid (utility) while also charging the batteries. This inverter is compatible with both mono- and polycrystalline type PV modules.

Features

• Pure sine wave inverter.
• Setup through sofware.

• Inverter can connect to various types of lead-acid batteries, glooded or VRLA (Gel or AGM)
• LCD display